How to divide the bandwidth of client computers without software

frequency signal power the Internet, where every computer is in use or connected to the Internet by the provider will be given the capacity of Bandwidth usage: 64 kb / s or 512 Mb / s and so on.

For business use such as Office and Warnet, need to be made the division of bandwidth, so that every computer connected to the Internet in a network having an equal parts. If there is no bandwidth setting it in a network who is first to use computers and to download software that large capacity, then the bandwidth will be too big part to cumputer direction, while the other computer's internet speed will slow down may not even be able to browse the internet.

There are two way to control bandwidth, among others:

1. Setting the OS
2. With Using Bandwidth Control Software

Which will be discussed here is to divide the bandwidth to client computers without using a Software

His way is as follows:

   1. Click Start ==> Run
   2. Then type gpedit.msc, then after that out of the box "Group Policy"
   3. In the "Computer Configuration", select "Administrative Templates"
   4. Then select "Network"
   5. Click on the "QoS Packet Scheduler"
   6. After that Select the "Limit reservable bandwidth"
   7. Choose from "Not Configured" to "Enable"
   8. After that the table under the heading of "Bandwidth Limit%" Change From "20" to "80 or 20", then "Apply", "OK". This setting depends on the number of computers, if we want to set each computer canbandwidth of 10% then we live input rate of 90%, if we set each computer to get 20% then we live on the input rate of 80%.

Hopefully Helpful